Metal Roofing Options for Older Raleigh, NC Homes
Metal roofing changes both the protection and the appearance of an older Raleigh home. Our office is on Honeycutt Road, about 9.5 miles from downtown. Ask about options suited to your roof.
Metal Roof Installation for Raleigh Houses
Most people who ask us about metal want this to be the last roof the house gets. In Raleigh the question usually comes with a second one: will metal look right on this particular house? A brick colonial in Hayes Barton, a 1990s two-story in Brier Creek and a renovated bungalow near Five Points each answer that differently.
Pro Performance Roofing installs standing seam and exposed-fastener metal across Wake County, and our office sits at 8480 Honeycutt Road in North Raleigh. The same trained crew handles every roofing job we take, and a production manager is on site while the panels go on. Ask which roofing options are available and suitable for your home. Older Raleigh neighborhoods add a step most suburbs skip. In a historic overlay district, a change from shingles to metal can fall under the city's review process, and we check that before anything is ordered.
Metal Roofing Systems We Install in Raleigh
The panel is only one choice. Where it meets the rest of the house matters just as much.
Standing Seam for a Full Roof
Concealed fasteners sit under raised seams, so the roof surface has no exposed screws to age. It gives clean vertical lines that suit modern infill homes and simple gable roofs in Raleigh. On a house with many dormers and valleys, every seam has to be laid out around them, and we show you that layout before you commit.
Exposed-Fastener Panels Where They Fit
Screws go through the face of the panel, which lowers the cost and suits porches, sheds and simple outbuildings. The washers need checking over the years. We tell you plainly when that trade-off makes sense, and we do not put exposed-fastener panels on the main roof of a home just to win a bid.
Metal Tied Into a Shingle Roof
Ask which roofing options are available and suitable for your home. The transition is the risk point. Where metal meets shingle, siding or brick, we build the flashing and closures as part of the job instead of sealing the gap with caulk and hoping.
Specialty Metal and Finishes
Some homeowners in 27608 want a profile or finish that reads as a design choice, not a utility roof. Ask which roofing options are available and suitable for your home. If a designer shingle or synthetic slate suits the house better, we will say that too.
What Raleigh Houses Ask of a Metal Roof
Three local conditions come up on nearly every metal conversation we have in the city.
Historic Overlay Districts
Oakwood, Boylan Heights and Glenwood-Brooklyn sit in Raleigh historic overlay districts, and exterior changes there go through a city review. Switching a roof from shingles to metal is the kind of material change that can trigger it. Check your association’s requirements and ask which product information is needed before work is scheduled.
1920s Framing Under a New Metal Roof
A century-old Hayes Barton or Five Points roof is rarely flat underneath. Board decking dips, earlier layers build up at the eaves and chimney flashing has been patched more than once. Panels show every wave in the deck, so we open a test area, check the boards and put any decking work in the quote before a panel is ordered.
Tree Canopy Inside the Beltline
Large trees stand close to many houses inside the Beltline. Leaves and needles collect in valleys and behind chimneys whatever the roof material, and limbs come down in wind. We plan valley and chimney details so debris can wash off rather than dam water, and we talk through which overhanging limbs to have trimmed before installation day. Permit requirements are confirmed for your address before we schedule.
How a Raleigh Metal Roof Project Runs
Look at the house together
We walk the roof and the street view, check the decking and ask how long you plan to stay. The visit is free for a full replacement.
Settle the scope
Full roof or partial, standing seam or exposed-fastener, and whether a review applies on your street. A written quote typically follows within 24 to 48 hours.
Order and schedule
Call (919) 241-7663 to discuss current availability and the expected schedule for your project.
Install and walk it
Discuss site protection, cleanup and the final review of the work before installation begins.
Expert guidance when you need it most.
Navigating an insurance claim or financing a new roof can feel overwhelming. Our experienced team is here to help you understand your options, communicate with your insurance company when needed, and assist you in making informed decisions every step of the way.
Insurance claims
We photograph and document storm damage, meet your adjuster on site, and help identify items the estimate missed. We do not act as your public adjuster or negotiate your settlement.
Insurance claimsFinancing options
Flexible plans to get the roof you need now, without the financial stress.
Financing optionsWhy Raleigh Homeowners Choose Pro Performance for Metal
a short drive From Downtown
Our Honeycutt Road office is about 9.5 miles from downtown Raleigh. A question after installation gets a visit from people who work across Wake County every day, not a call to an out-of-state crew.
Transitions Built, Not Caulked
On a partial metal roof, the joint with shingle, siding or brick is where leaks start. We build flashing and closures there instead of relying on sealant.
Review Checked Before Ordering
On older Raleigh streets we confirm whether a historic review applies before panels are ordered, so a material change does not stall your project halfway.
The Same Crew Every Time
The installers who quote the details are the ones who build them, with a production manager on site and an extended workmanship warranty behind the work.
More Roofing Work We Do in Raleigh
If shingles suit the house better, or a storm got there first, start here.
Metal Roofing Questions From Raleigh Homeowners
How much does a metal roof cost in Raleigh?
A metal roof in Raleigh usually costs more than an architectural shingle roof, and the gap depends on the panel type, roof size and how many dormers, valleys and chimneys the panels must work around. Standing seam costs more than exposed-fastener panels. A partial metal roof on a porch is a much smaller project. After a free visit, we send a written quote, typically within 24 to 48 hours. Call (919) 241-7663 to set one up.
Can I put metal on just my porch roof?
Often, yes. Ask which roofing options are available and suitable for your home. The panel itself is simple. The work is in the transition, where metal meets the shingles, the siding or the brick wall, and that is where we spend our attention. We can price the porch alone or alongside a full shingle replacement.
Will my historic district allow a metal roof?
It depends on the district, the property and the exact change, so we do not guess. Parts of Raleigh, including Oakwood, Boylan Heights and Glenwood-Brooklyn, are historic overlay districts with a review process for exterior work. Before anything is ordered, we confirm with the city what your project needs and provide the product details the reviewers ask for.
Should I choose standing seam or exposed-fastener metal?
For the main roof of a Raleigh home, standing seam is usually the better fit because its fasteners are hidden and nothing on the surface needs re-tightening. Exposed-fastener panels cost less and work well on porches, sheds and simple outbuildings, with screws that need checking over time. We show you both side by side and recommend the one that fits how you use the building.
Is a metal roof loud when it rains?
How a metal roof sounds in Raleigh rain depends mostly on what sits under it: solid decking, underlayment and the attic all change what you hear inside. Most homes have an attic between the roof and the living space. If quiet matters to you, tell us at the first visit and we will explain the assembly we would use.
Can my old 1920s house carry a metal roof?
Usually, once the deck is sound. Metal is lighter than many people expect, but it needs a flat, solid deck to lie true.
On older Raleigh houses in Hayes Barton and Five Points we check for soft board decking and old layers first, then price any repair in the quote so nothing surprises you on installation day.
How soon can you start a metal roof in Raleigh?
Call (919) 241-7663 to discuss current availability and the expected schedule for your project. Call (919) 241-7663 to discuss current availability and the expected schedule for your project. If you already have a design in mind, bring photos to the first visit. Request metal options online or call (919) 241-7663.
Thinking About Metal for Your Raleigh Home?
Ask about metal roofing options suited to your house, with a written quote.